Welcome to KZY Electronic Technology Co., Ltd
You are here:Home >> Products >> Sensor Module

Products

Products

Contact us

Contact: Louis
WhatsappWeChat : +86 18617158103
Tel: +86 18617158103
Direct: +86-0755-22235249
Made in china store: https://fut688.en.made-in-china.com/
Alibaba store: https://fut688.en.made-in-china.com/
Website: www.kzyeducabot.com
Add: Room 301, 3rd Floor, Zhengtong Pioneer Park, No. 12, Liuyuepuxia Road, Henggang Street Office, Longgang District, Shenzhen, Guangdong Province, China

Sensor Module

TM1637 LED Display Module 7 Segment 4 Bits 0.36Inch Clock RED Anode Digital Tube Four Serial Driver Board Pack

TM1637 LED Display Module 7 Segment 4 Bits 0.36Inch Clock RED Anode Digital Tube Four Serial Driver Board Pack
The module is a 12-foot clock with 4 points of positive digital (0.36 inches) display module driver IC TM1637, only two signal lines can make SCM four 8-segment LED.
   Module features are as follows:
   Display of male red for the four digital tube
   Adjustable digital tube 8 gray
   Level control interface for 5V or 3.3V
   4 M2 screws positioning holes for easy installation
   4 digital display interface module as shown below:
   Control Interface: A total of four pins (GND, VCC, DIO, CLK), GND to ground, VCC is the power supply, DIO of data input and output pin, CLK is the clock signal pin;
   Digital tube: 4 common anode score points with 0.36 inches LED, red highlights;
   Positioning holes: 4 M2 screws positioning hole diameter is 2.2mm, the positioning of the module is easy to install, to achieve inter-module combination.
  • TM1637 LED Display Module 7 Segment 4 Bits 0.36Inch Clock RED Anode Digital Tube Four Serial Driver Board Pack
    The module is a 12-foot clock with 4 points of positive digital (0.36 inches) display module driver IC TM1637, only two signal lines can make SCM four 8-segment LED.
       Module features are as follows:
       Display of male red for the four digital tube
       Adjustable digital tube 8 gray
       Level control interface for 5V or 3.3V
       4 M2 screws positioning holes for easy installation
       4 digital display interface module as shown below:
       Control Interface: A total of four pins (GND, VCC, DIO, CLK), GND to ground, VCC is the power supply, DIO of data input and output pin, CLK is the clock signal pin;
       Digital tube: 4 common anode score points with 0.36 inches LED, red highlights;
       Positioning holes: 4 M2 screws positioning hole diameter is 2.2mm, the positioning of the module is easy to install, to achieve inter-module combination.

  • Please submit your basic information, we will contact you as soon as possible!

    *

    *

    *

    *

Related products

Copyright 2022 KZY Electronic Technology Co., Ltd  All Rights Reserved  
Web Design—Tiandixin