Welcome to KZY Electronic Technology Co., Ltd
You are here:Home >> Products >> Sensor Module

Products

Products

Contact us

Contact: Louis
WhatsappWeChat : +86 18617158103
Tel: +86 18617158103
Direct: +86-0755-22235249
Made in china store: https://fut688.en.made-in-china.com/
Alibaba store: https://fut688.en.made-in-china.com/
Website: www.kzyeducabot.com
Add: Room 301, 3rd Floor, Zhengtong Pioneer Park, No. 12, Liuyuepuxia Road, Henggang Street Office, Longgang District, Shenzhen, Guangdong Province, China

Sensor Module

US-100 Ultrasonic Sensor Module DC 2.4V - 5V With Temperature Compensation Range Distance 450cm

This module is improved, the module itself has temperature compensation, the accuracy of the highest module now clean out treasure, absolute stable, economical, practical
20 * 45 mm module circuit 15 mm thick
This module 1, stable performance, measure distance accurate:
Can SRF05 and abroad, such as SRF02 ultrasonic ranging module comparable. Module high precision, blind area (2 cm) super close, stable is the product range to the market success of powerful according to!
2, main technical parameters:
1) the use of voltage: DC5V
2) the static current: less than 2 mA
3) level output: high 5 V
4) level output: bottom 0 V
5) induction Angle: no more than 15 degrees
6) detection range: 2 cm-450 cm
7) high precision: up to 1 mm
3. The wiring way:
VCC, trig (control terminals), echo (receiver), GND
  • This module is improved, the module itself has temperature compensation, the accuracy of the highest module now clean out treasure, absolute stable, economical, practical
    20 * 45 mm module circuit 15 mm thick
    This module 1, stable performance, measure distance accurate:
    Can SRF05 and abroad, such as SRF02 ultrasonic ranging module comparable. Module high precision, blind area (2 cm) super close, stable is the product range to the market success of powerful according to!
    2, main technical parameters:
    1) the use of voltage: DC5V
    2) the static current: less than 2 mA
    3) level output: high 5 V
    4) level output: bottom 0 V
    5) induction Angle: no more than 15 degrees
    6) detection range: 2 cm-450 cm
    7) high precision: up to 1 mm
    3. The wiring way:
    VCC, trig (control terminals), echo (receiver), GND
    4. Method of use:
    A control mouth hair a 10 US above the high level, can wait for high level output receiver mouth. A has an output can open timer time, when the mouth into a low power can be read at ordinary times timer values, where you for the ranging time, can calculate the distance. This will continue the cycle, can reach you move measurement value ~ ~
    5. Module working principle:
    (1) the IO trigger ranging, to at least 10 us high level signal;
    (2) module automatically send eight 40 KHZ of square wave, automatic testing if it has any signals return;
    (3) a signal to return to, through the IO output top level, the duration of the high level is from the launch ultrasonic returned to time. Test distance = (high level time * sound velocity (340 M/S)) / 2;
    US-100 ultrasonic ranging module can realize 2 cm ~ 4.5 m non-contact ranging function, with a 2.4 ~ 5.5 V of wide voltage input range, static power consumption less than 2 mA, bring their own temperature sensor calibration on the ranging results, and has GPIO, serial ports and so on many kinds of communication mode, inside take watchdog, stable and reliable.
    The main technical parameters
    Electrical parameters US-100Ultrasonic ranging module
    Working voltage DC 2.4V~5.5V
    Static current 2mA
    Working temperature -20~+70degrees
    Output way Level or UART (jumper cap choice)
    Induction Angle Less than 15 degrees
    Detection range 2cm-450cm
    Detecting precision 0.3cm+1%
    UART mode serial interface configuration 9600 baud rate, starting a one, and stop bits a, data bits, eight, and white parity checking, no flow control.
  • Please submit your basic information, we will contact you as soon as possible!

    *

    *

    *

    *

Related products

Copyright 2022 KZY Electronic Technology Co., Ltd  All Rights Reserved  
Web Design—Tiandixin