3D Printer Parts E3D V6 Volcano hotend Large diameter Nozzle 1.75mm/0.6 0.8 1.0 1.2mm 12V/24V remote print J-head

E3D V6 3D Print J-head Hotend Remote Direct Long Short Extruder 3D Printer Parts Aluminum Hot End For 1.75mm 3.0mm Filament

Description:

 V6 has the following advantages over V5:

1, to reduce the heat sink length, thickness and diameter (shorter length is conducive to the stability of increasing the heat end), while increasing the number of fins, the heat end reduce weight at the same time, has better heat dissipation performance and stability.

2, external rotation gas heavy joint for a built-in pipe clamp, further reduce weight and reduce the hot end length, also make the feeding tube more deeply into the hot end, feeding more powerful (pneumatic connector can only be inserted a small tube into the feeding, easy to cause the feed is not smooth and other issues).

3, improving the original heating block, appearance is more concise and practical, heating tube, a thermistor and aluminum block contact more fully, and thus more precise temperature control outstanding.

Description:

*Heat tube:12V 40W,length 1 meter

*Thermistor:100K NTC B 3950 plusmn1% ,length 1 meter

*This 3D Printer J-head Hotend is applied for 1.75mmFilament E3D ;Long-Distance Filament Bowden extruder

*Lastest technology,stable and reliable performance, to make J-head Hotend more durable.