3D Printer MK8 Extruder Upgrade Kit Springs Extruder Sock Tube Stepper Dampers Smoother for Creality Ender 3 CR10 CR-10 Printer

MK8 Extruder Upgrade Kit Springs Extruder Stepper Dampers Fit for Creality Ender CR-10S 3D Printer Accessories

Item Description:

A premium upgrade kit for your Ender 3 printer, this quickly and easily installed collection of tried and tested upgrades improve the performance and reliability for your Ender 3 printer.

The included aluminium extruder upgrade allows for more reliable filament feeding and does not wear out over time as the factory supplied plastic assembly will do.

The high temperature silicone hot end sock helps with the hot end temperature stability of your heated block, the silicone sock also prevents heat radiating onto your print, keeping this heat away from your print allows for increased overhangs. This is essential for producing quality prints.

The four flat ended compression bed springs improve the rigidity and stability of the print bed, a level bed is the key to producing high quality prints, these improved stiffness flat ended springs means your bed stays level for longer. Due to the increased length of these springs you may need to adjust your Z axis end stop on certain for Ender 3 printer versions.

The TL-Smoother is an addon module for the stepper motor drivers, installed inside the control board box. One of the key reasons for installing the TL-smoothers on the for Ender 3 is reduction in the ‘salmon skin‘ type effect which can be evident on the surface of prints. These are fitted to the X and Y motor axis of the printer.

Two high quality NEMA 17 stepper dampers are included one for mounting on the X stepper motor and another for the Y stepper motor. Installing these gives a drastic noise level reduction from your 3D printer.Please note some for Ender 3 models have push fit pulley wheels, it is easy to check which version you have, if your pulley is not secured to the motor shaft with grub screws you have the push fit version, sadly the dampers can not easily be installed with push fit pulley wheels.

Key Features:

Suitable for Creality Ender 3, Ender 3 Pro

High Quality Parts

Improve Print Quality

Improve Printer Performance

Silence Your Printer

Correct ‘Salmon Skin‘ On Prints

Product Details:

1 x Aluminium Extruder Assembly

2 x Silicone Hot End Sock

4 x Flat Ended Compression Springs

2 x NEMA 17 Stepper Damper

2 x TL-Smoother Modules & Leads